Analogue Innovation’s elastomer isolator kit brings considerable sonic advantages while removing most of the frustration inherent with the ownership of a suspended turntable.
Tag: TD-150 Modification Series
Thorens TD-150, Rebuild & Modification Part Four
A tale of two turntables continues. In part 4 we’ll wrap up the series with some final observations, build notes and listening tests.
Building the AAP12, Thorens TD-150 Modification Part Three
Herein we continue the tale of two turntables with the build of the AAP12, a turntable based on a Thorens TD-150 but with extensive modifications.
Thorens TD-150 Rebuild Part Two, Project Maple
a stock Thorens TD-150 transformed but with its original charm intact.
Thorens TD-150, Rebuild & Modification Part One
It’s been a while since I owned a suspended belt drive turntable. I decided to build two decks; one based on a stock TD-150 MK2 in a Maple plinth and the other, using the inner workings of the TD-150 (sub-chassis, bearing, platter and motor) but with a new top plate and extensive modification and in a Cherry plinth.
DIY Plinth Dimensions For Linn LP12 / Thorens / Ariston and other suspended turntables
With a great deal of research and a bit of trial and error I have managed to assemble a list of dimensions that work to build a Linn plinth. They are published here in the hope that they will help future DIYers.