The process of veneering speaker boxes with an iron-on veneer. It is no more difficult than using a traditional veneer, but requires fewer tools, less space and is less messy. It also gives you a greater margin for error so is perhaps a better option for the first-time speaker builder.
Tag: Projects
Active Up2Stream Plinths for the CHN-50 Speakers
These plinths finish the CHN-50 project off nicely, resulting in a compact active system capable of exceptional performance.
DIY Bookshelf Speakers With MarkAudio CHN-50 Drivers
Intrigued by the potential sonic advantages of a full-range driver, and spotting the introduction of a new kit by British driver manufacturer MarkAudio, I decided it was time to give one a try.
Thorens TD-150, Rebuild & Modification Part Four
A tale of two turntables continues. In part 4 we’ll wrap up the series with some final observations, build notes and listening tests.
Building the AAP12, Thorens TD-150 Modification Part Three
Herein we continue the tale of two turntables with the build of the AAP12, a turntable based on a Thorens TD-150 but with extensive modifications.
Thorens TD-150 Rebuild Part Two, Project Maple
a stock Thorens TD-150 transformed but with its original charm intact.
Thorens TD-150, Rebuild & Modification Part One
It’s been a while since I owned a suspended belt drive turntable. I decided to build two decks; one based on a stock TD-150 MK2 in a Maple plinth and the other, using the inner workings of the TD-150 (sub-chassis, bearing, platter and motor) but with a new top plate and extensive modification and in a Cherry plinth.