Like the SP10 in the late ‘60s, the SL-1200G has raised the bar and set new performance standards that should redefine expectations for what high-end vinyl playback should be. The SL-1200G is a masterpiece. You owe it to yourself to hear one.
Tag: Turntable
Building the AAP12, Thorens TD-150 Modification Part Three
Herein we continue the tale of two turntables with the build of the AAP12, a turntable based on a Thorens TD-150 but with extensive modifications.
Thorens TD-150 Rebuild Part Two, Project Maple
a stock Thorens TD-150 transformed but with its original charm intact.
Thorens TD-150, Rebuild & Modification Part One
It’s been a while since I owned a suspended belt drive turntable. I decided to build two decks; one based on a stock TD-150 MK2 in a Maple plinth and the other, using the inner workings of the TD-150 (sub-chassis, bearing, platter and motor) but with a new top plate and extensive modification and in a Cherry plinth.
DIY Plinth Dimensions For Linn LP12 / Thorens / Ariston and other suspended turntables
With a great deal of research and a bit of trial and error I have managed to assemble a list of dimensions that work to build a Linn plinth. They are published here in the hope that they will help future DIYers.
Audio-Technica AT-VM95 Detailed Review & Measurements
Succeeding the AT95 was a tough ask, but Audio-Technica have risen to the challenge. May the ‘green king’ rest in peace, the successor has arrived to steal the throne.
Technics SL-1200GR / SL-1210GR Turntable Review
When Technics commercialised the direct drive turntable in the ‘70s, they became known as class-leading products among the best available at any price. These new Technics turntable set new technical standards which will pave the way for future evolution of vinyl and the equipment we use to play it.
SweetVinyl SugarCube SC-1 Vinyl Click & Pop Remover Review
The SugarCube enhances the listening experience with vinyl old and new, and for that it earns a thoroughly deserved recommendation.
Technics SL-L20 Linear Tracking Turntable Service And Repair
I’ve yet to come across a Technics that didn’t at least sound good, and I had great fun spinning 7” singles on the L20 before returning it to its rightful owner ready to deliver another few decades of faithful service.
Cheap Turntable Isolation Platform with Corian and Sorbothane
I was surprised by the performance improvement. A highly recommended and worthwhile DIY upgrade that must be heard to be believed.
Little Fwend Automatic Tonearm Lifter Review
The Little Fwend is as thoughtfully designed as it is nicely machined. Setup correctly it does its job with no hassle and minimal user input, besides a quick push on its platform after each use. Expensive it may be, but it’s a terrific accessory and is therefore highly recommended.
The World’s Cheapest Vinyl Turntable, Review and Destruction
If there was ever a product deserving of its place at the bottom of a landfill, this is it.
Introducing The Hardline According To Terence Trent D’Arby – 30 Years On
It’s been 30 years since the man “Smash Hits” magazine christened Terence Tea-Towel released his debut album, “Introducing The Hardline According To Terence Trent D’Arby”. In order to understand this album’s significance, one has to place it in context. 1987 was a pretty depressing year as far as mainstream pop music was concerned. The charts…… Continue reading Introducing The Hardline According To Terence Trent D’Arby – 30 Years On
Audio-Technica AT33PTG/II Moving Coil Cartridge Review
You could spend a fortune on the best cartridge money can buy for minimal return, or you could opt for the modestly price option that simply gets everything right and buy more music. I know which I’d rather.
Arcam rPhono Phono Stage Review
Arcam have been known to produce some fine phono stages and the rPhono continues that tradition.
A Guide to Phono Stages
A phono stage is a preamplifier used to boost the minute signal of a phono cartridge, while reversing the equalisation curves used when cutting the record. Here’s our complete guide.
Should you Buy an All-In-One Turntable?
The turntables on today’s market fall into 1 of 2 categories. All-in-1 tables consist of a turntable, amplifier and speakers, contained within the same casework. Some systems include support for other formats too, including CD, digital playback via USB and even cassette. But are they as good as they seem?
The Current Turntable Market (2016)
Exploring the 2016 turntable market with a selection of turntables at various price points.
The Components of a Turntable
Many of the most popular record players for sale today are of an all-in-1 design, meaning that the record player, amplifier and speakers are housed within the same case, which is usually of a retro design in a portable space-saving form factor. These devices can be purchased for less than £100, which compared to even a budget system comprised of a separate turntable, amplifier and speakers can make them seem like excellent value for money. To assess whether or not this is the case, we first need to see what actually makes a turntable tick.
How to Set Up a Turntable
An in-depth guide to correctly setting up a turntable. The correct way to adjust vertical tracking force, vertical tracking angle, anti-skate / bias and azimuth are all discussed here.